Directions

Directions for Use of Dog Waste Tube

1. Remove top end cap from dog waste tube
2. place plastic bag containing dog waste into tube
3. replace top end cap

Directions for Emptying Dog Waste Tube

1. place trash bag or container under the dog waste tube
2. remove bottom end cap
3. bags will fall into waste receptable
4. replace bottom end cap

Waste Tube Mounting Instructions

1. remove tape from end caps
2. remove end caps
3. remove address label, if desired
4. remove contents of dog waste tube
   • cable ties
   • white rope
   • short black tube
   • instructions and
   • business cards
5. thread white rope through short black tube
6. center short black tube on dog waste tube
7. thread white rope, from outside, through 2 perforations nearest the ends of the centered short black tube
8. thread white rope through end caps, from inside
9. knot ends of white rope to prevent slipping through the end cap
10. apply tape or heat to ends of rope to prevent raveling, if desired
11. take one cable tie and loosely close around dog waste tube, short black tube and your choice of place to mount

    
    ATTENTION: Mount the dog waste tube high enough on the post, so that a trash bag or receptacle can be placed under it to collect contents of tube

12. the short black tube must be between dog waste tube and post, so that the end caps can be removed and replaced easily
13. place second cable tie around dog waste tube, short black tube and post
14. pull end of cable tie so that dog waste tube is secure, but loosely enough so that short black tube is not squeezed
15. the third cable tie is provided in case one cable tie was over tightened, or you would like to have a third cable tie in place